Ivanko Barbell Company

RUBBER FLOORING

Over 25 years ago. Mitchell Rubber designed and manufactured the very first all-rubber interlocking gymnasium flooring system. Today, our Best Flooring Gymnasium Tile remains the world wide leader in rubber weight room flooring. The interlocking tiles will fit any size and shape room, quick and easy to install, no glue or adhesives required. And just as easy to remove or relocate. The richly-textured pebble grain surface comes in a wide range of colors, and cleans easily with soap and water.

CALCULATING COMPONENT PIECE
FOR RUBBER FLOORING ORDERS
CLICK HERE

Instructions for Tile Installations
CLICK HERE

The colors!

As with any color sample, please verify the colors by requesting a color brochure and or color samples. Remember, except for black, slight variations can occur from one order to another.


Black	Grey	Khaki	Burgundy

Royal Blue	Terra Cotta	Briliant Red	Dust Blue

	Brown	Green

The pieces!

RF-CTR	RF-EDG	RF-COR	RF-ICOR

Rubber Flooring Center	Rubber Flooring Edge	Rubber Flooring Corner	Rubber Flooring Inside Corner

	DF	RF-CS

	Diamond Flooring	Carpet Saver

IVANKO INTERLOCKING RUBBER FLOORING SPECIFICATIONS

Best Flooring Architectual Specification

Stock No.

Description

Size

Approx. Weight

CTR-4
COR-3
EDG-2
ICOR-1

Center Block
Corner Block
Border Block
Inside Corner Block

4 square feet
3 square feet
2 square feet
1 square feet

12.0 lbs.
8.5 lbs.
6.0 lbs.
3.0 lbs.

Color: Black
Finish: Pebble Grain
Approx. Size: 24"x24"x7/16"

1. Blocks must be high-pressure molded as manufactured by Mitchell Rubber Products, Inc., City of Industry, California.
2. Blocks must have staggered interlock every 12" to help prevent disengagement.
3. Interlocking blocks function at any 90-degree angle.
4. Blocks must have life expectancy against wear of ten years.
5. Blocks have beveled border where required - full 12" border.

Test Methods
1. Shore A Durometer ASTM D2240
2. Co-efficient of Friction: "British Skid Resistance Tester" ASTM E 303.
3. Compression Recovery ASTM 545.
4. Abrasion Resistence - Taber Abrader using CS-17 wheels under a pressure of 1000 grams.

Summary of Tests
1. Shore A Durometer 55 at 70-degress Fahrenheit.
2. Wet-Dynamic-not less than 30.
3. Tensile Strength - not less than 890 psi.
4. Shrinkage not to exceed 1.1% after seven days over aging at 180-degrees Fahrenheit.
5. Compression and Recovery - not less tha 90%.
6. Abrasion Resistence - weight loss: grams per revolution 0.0011.
7. Specific Gravity - 1.52.
8. Percentage Elongation - 510%.
9. 300% Modulus (psi) - 575 psi.
10. Tear die "E" (ppi) - 153 ppi.

IVANKO DIAMOND PLATE RUBBER FLOORING SPECIFICATIONS

Diamond Plate 4' x 4' Architectual Specification

Stock No.

Description

Size

Approx. Weight

Diamond Plate 4' x 4'

16 square feet

50.0 lbs.

Color: Black, Red, Grey, Special Blue
Finish: High Tech Diamond Pattern
Approx. Size: 48"x48"x 3/8"

1. Tiles must be high-pressure molded as manufactured by Mitchell Rubber Products, Inc., City of Industry, California.
2. Tiles must have homogeneous diamond pattern to create seamless appearance.
3. Tiles function at any 90 degree angle.
4. Tiles must have life expectency against wear ten years.

Summary of Tests
1. Shore A Durometer 60 at 65-degress Fahrenheit.(ASTM D2240)
2. Wet-Dynamic-not less than 30.
3. Tensile Strength - not less than 890 psi.(ASTM D 412)
4. Shrinkage not to exceed 1.1% after seven days over aging.(ASTM D 1414)
5. Compression and Recovery - not less tha 90%.(ASTM D 545)
6. Abrasion Resistence - weight loss: grams per revolution 0.0011.(D1630)
7. Specific Gravity - 1.52.(ASTM D 1817)
8. Percentage Elongation - 510%.(ASTM D 412)
9. 300% Modulus (psi) - 575 psi.(ASTM D 412)
10. Tear die "C" (ppi) - 153 ppi.(ASTM D 412)

P.O. Box 1470 · San Pedro, CA 90733 · USA · Phone 310-514-1155 · Fax 310-514-1363 · email info@ivankobarbell.com · www.ivankobarbell.com