Ivanko Barbell Company

Specially designed frame
allows you to stack mirrors
for easy storage.

CGM-2PK
IVANKO GLASSLESS MIRROR

A VIEW THAT'S CLEAR, LIGHT, AND SAFE

Mylar, the amazing space age super reflective material used in the Hubble Space Telescope, is an image good enough for the stars. Our glassless mirrors are made from metallized Mylar plastic film. They give a brighter, sharper reflection than plate glass, with no ghost images. Our popular 4' X 6' vertical mirror, with stacking wheels, weighs only twelve pounds! Best of all, our mirrors won't shatter, making them much safer than glass.

NOTE: Because of the vulnerability of mylar mirrors, adult supervision is advised when children are present.

79" x 53" 23LBS for each mirror
sold in multiples of 2 only.

Be sure to check our freight policy HERE
and cleaning instructions HERE

Optical Clarity
Our“Glassless Mirror” reflects an image that is amazingly clearer and brighter than all but the most expensive glass mirrors on the market.

Lightweight
The mirror panels are extremely lightweight which allows for easy handling and installation

Versatility and Mobility
The panels can be made in any desired size or shape to accommodate any facility or any application.

Cost
The Ivanko Glassless Mirrors can cost up to $500 to $600 less per panel over conventional beveled glass mirrors.

CGM-2PK SIZE & PRICE

Part Number	Description	Price
CGM-2PK	Ivanko Glassless Mirror 2 pack	1180.00 pk./ 590.00 ea.
CGMS	Ivanko Glassless Mirror Rolling Stand (1 unit includes hardware for 1 mirror)	125.00 ea.

CGMS
IVANKO GLASSLESS MIRROR ROLLING STAND

Our specially designed frame allows you to stack mirrors for easy storage. A 36-foot long mirror (9 vertical panels) takes just four by five feet of floor space when stacked!

CGMS Glassless Mirror Rolling Stand Assembly Instructions

All Mirror Panels come with two pre-installed aluminum angle brackets for wall mounting. Remove these brackets if you are using the mirror base. Keep the clear plastic sheet over the mirror face to help protect it while mounting the bases.

1) Attach Bumper Guard to tabs in 'T' Bars using the 4 Countersink Bolts provided. Align rounded corner of Bumper Guard to rounded corner of tab for Bumper Guard. Tighten these Countersink Bolts completely with a Phillips head screwdriver.

2) Have a helper hold Mirror Panel centered on base. Side edges of Mirror Panel should be centered and flush with vertical side edges of 'T' Bar.

3) Drill drive four 1 1/2" Self-drilling Screws through the holes in the vertical square tube of 'T' Bar into the Mirror Panel's aluminum frame. Tighten screws up to the point where sponge pads on 'T' Bar begin to slightly compress. Be careful not to over tighten screws to avoid stripping. Do not press excessively on mirror surface.

4) Plastic protective cover may now be removed from Mirror Panel.

5) Repeat process of drill driving through hole in Bumper Guard using 3/4" Self-drilling Screw. Secure Bumper Guard to bottom of Mirror Panel frame using the one 3/4" Self-drilling Screw provided. Do not over tighten screw.

Limited Warranty

July 25, 2006

Re: Mirrorlite/Ivanko glassless mirrors – Limited warranty information.

Limited warranty on glassless mirrors: Mirrorlite products as the manufacturer of the Ivanko glassless mirrors, warrants any merchandise sold by Ivanko and it’s dealers and distributors to be free from defects in workmanship and material for a period of (90) days from the date of sale. The warranty does not cover damages that occur in shipping, unpacking, and or installation of the mirrors.

Mirrorlite products’ and Ivanko Barbell Company’s obligations are limited, at our option, to a refund of the purchase price or to replacement or repair and we shall not be liable for any injury, loss or other damages, consequential or otherwise, arising from the use, or inability to use, any merchandise sold and distributed or manufactured by Mirrorlite and/or Ivanko. Mirrorlite nor Ivanko shall not be liable to make a refund or to repair or replace, if the merchandise has been damaged by accident, negligence, alteration abuse, misuse or improper installation.Mirrorlite and /or Ivanko reserve the exclusive right to determine to approve or decline any claims as to their validity. All claims under this Limited Warranty must be made to Ivanko Barbell in writing within (90) days of sale. The decision to approve or disapprove any claims rests solely with Mirrorlite and/or Ivanko.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR INPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR USE, AND IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON MIRRORLITE OR IVANKO’S PART. THIS LIMITED WARRANTY CONSTITUTES THE ONLY WARRANTY MADE BY MIRRORLITE AND IVANKO, ALL OTHER WARRANTIES BEING EXPRESSLY INCLUDED.

PRICES, SIZES, AND MANUFACTURING SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Cleaning and Maintenance of Mirrors

- General cleaning or cleaning water spots -

Before attempting to clean the mirror, use compressed air (i.e Dust Off which can be found in most photographic stores) to make sure that all dust and debris are off the mirror.
You can use an optical grade cleaning cloth (no lint) and Windex.
Apply Windex to cloth until cloth is damp (saturated) but not dripping.
Clean the mirror in one direction then stroke using a fresh part of the cloth after each pass.

- Repair of Dimples on Mirrors -

Use a heat gun (350 degree temperature) can be used to remove "dimples" from the mirror. Hold heat gun 1/2 "- 1"
from the mirror.Move in a circular fashion working towards the outside edge. This should remove the dimples.

FREIGHT RECEIVING INSTRUCTIONS
For IVANKO GLASSLESS MIRRORS

Make your notes on the paper work you sign!

1. Inspect the outside of all cartons for damage (tears, holes, footprints, abrasion marks, etc.) Open to inspect while driver waits (they are required to do so), and make sure the driver acknowledges any damage you find. If you do not inspect your mirror before the trucker leaves, you may waive your right to collect damages.

2. Please remove mirror from box and carefully peel the protective plastic cover off the mirror face, and then inspect the mirror surface for any signs of damage. Be sure to make a notation on delivery driver's paperwork describing any box damage you notice to help us in the event of a concealed damage claim becomes necessary.

3. If merchandise is damaged, please note the number of units damaged on the delivery driver's paperwork, sign, and keep your copy. Keep damaged merchandise in its original shipping box. DO NOT refuse it or allow the driver to take it (it will slow down the claim process.) Immediately call IVANKO at (800) 247-9044 (or 310-514-1155 within CA) and inform us of any damage. We are available 7:30AM-4:30PM PST, Monday through Friday. We will process all paperwork and file a claim on your behalf. We will also expedite a replacement if necessary.

4. If damage is not noticed at time of delivery, please be aware that a concealed damage claim cannot be made after 5 days from receipt of merchandise, and it is much more difficult to prove. Once again, call immediately within that time frame and we will handle the rest. Be sure to keep the original shipping carton and the paperwork that you signed with your notes.

All customers must pay IVANKO’s standard return policy of 25% re-stock fee if an order is cancelled after 24 hours of being placed, in addition to shipping fees if the order has already been shipped.

Have your copy readily available when your order arrives to ensure the condition of all packages.

All freight quotes are good for 30 days only.

Ivanko Barbell Company· P.O. Box 1470 · San Pedro, CA 90733 · USA · Phone 310-514-1155 · Fax 310-514-1363
email · info@ivankobarbell.com · www.ivankobarbell.com